Non-standard
Metal elements are the main custom line, but every family can be customized. Custom filter elements in oil, water, gas and metal media, plus filter housings and complete equipment. Typical custom work includes special-shaped elements, hydraulic support elements, metal elements, melt filter elements, candle and bundle elements, high-temperature dust cartridges, breather elements, three-in-one filter discs, conical elements and wedge-wire self-cleaning elements.
Send the drawing or 3D file, and we confirm media, rating and end-cap construction before quoting.
Send the old element; we measure it and reproduce the interface, height and sealing geometry.
For equipment without documentation, we reverse-engineer the housing and propose a matched element.
Media, pleat density and support structure are chosen for the actual temperature, pressure and contamination load.
Custom product types
Eight shapes that come in as a drawing, an old element or a measurement, and leave as the same part with a new one beside it.
Polyester melt filtration, pleated high flow. Made to the spinneret pack and the polymer grade.
Coal chemical amine liquid and catalyst recovery. Single candle or the whole bundle with the tube sheet.
Metallurgy and cement tail gas at 400-450 °C. Metal mesh or ceramic media on a steel frame.
Shearer and hydraulic station oil. Bore, length and seal are copied from the element in service.
Fermenter and tank gas exchange. Hydrophobic media, threaded or bayonet connection.
Reaction, washing and drying in one vessel. Sintered mesh discs stacked to the shaft length.
Pipeline coarse filtration and equipment inlet protection. Cone angle and flange to the drawing.
High solids duty with online backwash. Slot width from 20 to 200 µm, gap held by the wire profile.
From coil to finished element
A custom element is not a drawing shop. The coil is rolled, the ends are welded, the media is pleated and the whole assembly is pressure tested before it ships, so a first order and a repeat order come off the same line.
Get a quotation
Drawing, sample or measurement are all acceptable. Samples are confirmed before mass production.
Fast quotation
One working day for a first answer. MOQ and lead time are stated with the quotation.
Open the inquiry form