Xinxiang, Henan — Hometown of Filtration in Chinasales@jianash.com+86 182 0360 6938WhatsApp
JIANASHJIANASH
Filtration & Separation
Request a Quote

Liquid-liquid separation

Coalescing separator filter

Built around two different elements — a coalescer and a separator — to take free water out of oil without changing the oil itself.

Home/Products/Filter housings & strainers/Coalescing separator filter
Coalescing separator filter housings

Specification

Elements
Coalescer element plus separator element, ordered as a pair
Stage 1
Filtration, demulsification, droplet growth, coalescing
Stage 2
Hydrophobic separation, free water blocked and drained
Body
Carbon steel or stainless steel, with sump and drain valve
Differential pressure
Gauge or switch on each stage
Request a quoteSend a drawing

Drawing, sample or measurement accepted. Samples are confirmed before mass production.

This is the unit that dries oil rather than filtering it. If the problem is water and air in the oil, the answer is a coalescing separator or a purification unit; if the problem is solids in the pipe, it is a strainer.

What it does

How this housing works

  • Stage 1: oil enters the first tray, passes the coalescer element inside-out; solids are held, droplets grow and settle into the sump
  • Stage 2: oil enters the separator element from outside in, collects in the second tray and leaves at the outlet
  • The separator element is oleophilic and hydrophobic: oil passes, free water is held outside and drops to the sump
  • Water leaves through the drain valve at the bottom; the oil leaves dry

Where it runs

Typical duties

  • Turbine and transformer oil
  • Hydraulic oil with free water
  • Diesel and fuel polishing
  • Marine and offshore lube circuits

Other housings

The rest of the range

All eight types
Security filter housingBasket strainerReturn-line filterSuction filterIn-line pressure filterDuplex filterAutomatic back-flushing filter and gas separator

Get a quotation

Send the line data

Medium, flow, pressure, bore and the rating you need to hold — housing and element are sized together.

Fast quotation

Send the model, a drawing or a photo

One working day for a first answer. MOQ and lead time are stated with the quotation.

Open the inquiry form